Fence Installation
New Fence Installation in the East Valley
Get matched with a licensed local contractor for wood, vinyl, chain-link, or ornamental iron fence installation — free, no obligation.
As of September 2026, new fence installation in the East Valley typically runs $15–$45 per linear foot installed, or roughly $1,500–$9,000 for a full backyard project depending on material and length. East Valley Fence & Wall Pro matches homeowners in Gilbert, Chandler, Mesa, Queen Creek, and San Tan Valley with a licensed local fence contractor for a free quote — call (555) 010-1000 or request a match below.
East Valley Fence & Wall Pro is a free matching service, not a fencing contractor — we connect homeowners with independent, licensed local pros who install new fencing. Whether you're enclosing a new backyard, replacing a fence after storm damage, or adding a side-yard gate, here's what a real installation project involves and what to expect.
What a Fence Installation Project Involves
- Layout and survey: confirming property lines, easements, and any HOA-approved fence zone before digging.
- Material selection: wood, vinyl, chain-link, or ornamental iron — each with different cost, privacy, and maintenance tradeoffs (see our material comparison).
- Post-hole digging: East Valley soil commonly includes caliche — a hard, cemented layer of calcium carbonate a few inches to a few feet down — which can slow post-hole digging and sometimes calls for mechanical augering or hand-breaking through the layer. A contractor who's worked the East Valley before knows to plan for this.
- Permit and HOA check: many East Valley cities require a permit for taller fences or front-yard fencing, and most HOAs have their own style/height rules. See our Arizona fence permit & HOA guide.
- Installation and cleanup: setting posts, hanging panels or pickets, gates and hardware, then hauling away old fencing and debris.
What Affects Installation Cost
The material you choose drives most of the per-foot cost difference (see the table below), but total project cost also depends on:
- Total linear footage and number of corners/gates
- Soil conditions — caliche or rocky ground adds labor time
- Slope or grading (stepped vs. racked panels on sloped yards)
- Height and any HOA-required finish (e.g., stucco-capped block, matched paint colors)
- Removal and haul-away of existing fencing
For full per-material pricing and a real worked example, see our Fence Installation Cost guide.
Choosing a Material
| Material | Typical Cost/ft Installed | Best For |
|---|---|---|
| Wood | $15–$35 | Classic backyard privacy on a budget |
| Vinyl | $20–$40 | Low-maintenance, long lifespan |
| Chain-Link | $10–$25 | Budget perimeter, pet/property containment |
| Ornamental Iron | $25–$45 | Front-yard curb appeal, pool-adjacent visibility |
| Block Wall (CMU) | $35–$65 | Permanent perimeter, HOA standard |
Vetting a Fence Contractor
- Confirm an active Arizona ROC license — fencing is licensed under CR-14 (or C-14/R-14). Verify directly at azroc.gov before signing anything.
- Get a written estimate that itemizes material, labor, permit handling, and haul-away.
- Ask for proof of current liability insurance.
- Check for real local references or recent East Valley project photos.
Get Matched With a Fence Installer
Free, no-obligation — most requests are matched with a licensed local pro the same business day.
Frequently Asked Questions
How much does new fence installation cost in the East Valley?
Most projects run $1,500–$9,000 depending on material and length, or roughly $15–$45 per linear foot installed. See our full cost breakdown by material on the fence installation cost guide.
Do I need a permit to install a fence?
It depends on your city and the fence height — many East Valley cities allow shorter backyard fences without a permit but require one for taller fences or front-yard fencing. See our Arizona fence permit and HOA guide for city-by-city notes.
How long does installation take?
A typical residential fence installation takes 1–3 days once materials are on site, longer for full-property block wall perimeters or jobs requiring engineered footings.
Do East Valley contractors need to be licensed?
Yes — fence installation in Arizona is licensed work under ROC classification CR-14 (or C-14/R-14). We only match homeowners with contractors who report holding an active license.
Can the same contractor install both fence and block wall sections?
Many East Valley properties combine a block wall perimeter with wood, vinyl, or iron fencing on interior or side-yard lines. Some contractors handle both; others specialize. Tell us your project and we will match accordingly.